To round things up, here are answers to some frequently asked questions. Once the blades are no longer running, wipe off any excess oil from the blades using some tissue.Īt this point, you’re done. Once the oil has been applied to the blade, turning on the clippers will distribute the oil more efficiently in and around the blades. This leads to the opposite of the desired effect – tugging, pulling, and an ineffective trim. Then, tilt the blade until you get an even film along the length of the blade.Īlthough using more clipper oil will prevent the blades from getting hot, it will also clog up the blades. Apply one drop to one end of the blade, one drop to the other end, and one drop in the center. What you want to end up with is a nice, thin, even film of clipper oil along the entire length of the teeth of the blade. This may prevent you from having to remove the whole blade itself.
You could also use one of those craft pipe cleaners to simply push underneath the blade and force out the gunk under it. Because you may need to unscrew the blade to remove it, you might not do this as often, but it’s important to do it occasionally. You should also remove the blade from the clipper now and again so you can brush underneath it. If you don’t have one, a toothbrush would be absolutely fine. Many clippers come with a little brush designed for exactly this purpose. To remove this hair, gently brush around the blades with a brush trying to get rid of hair and old oil. You’ll want to get rid of this hair before you oil it because the oil will simply add to the accumulated gunk and the lubrication won’t be as effective. Just like unoiled blades, clogged hair is a common reason for poor trims. This excess hair clogs up the blades and causes the clipper to tug and pull as you use it. When you use your clippers, some stray hairs will definitely get stuck between the blades over time. If your clippers didn’t come with any, using Wahl’s blade oil ( Amazon Link) would be fine no matter what brand you’re using. Here’s a quick, step-by-step routine you can use to oil your clippers in the most effective way possible each and every time. Because of this, you’ll find it in plenty of products used on or near the skin.
Mineral oil is often used because it’s chemically inactive (i.e inert) and stable. What Kind Of Oil Is Clipper Oil?Ĭlipper oil usually contains refined mineral oil, together with additives to preserve it.
When the viscosity is that low it won’t provide enough protection.īut clipper oil needs to be thin enough to get in and around the blades and provide a proper lubricating coating without clogging everything up.īut it also needs to be able to tolerate the high temperatures generated by blades rubbing against each other extremely fast.Īlthough there are DIY alternatives to clipper oil that can be used, it’s generally best to use the oil that would (most likely) have come with the pair of clippers itself. Not super-low viscosity like water, for instance. What you need from a proper, lubricating clipper oil is a low-viscosity (i.e thin) and the ability to withstand high temperatures. They don’t have lubricating properties in the same way that clipper oil does and shouldn’t be used instead of it. The blades are darker due to all the grinding and there will be more tugging and pulling as you trim.Ī common misconception is that coolants and disinfectants that are sometimes used on clippers are the same as clipper oil. You can spot a worn-out pair of clippers pretty easily. When applied to the blades what it does reduces friction, leading to less wear-and-tear, more effective trims, and a longer-lasting pair of clippers. You’re about to get all of that (and more).Ĭlipper oil is a lubricating oil that usually comes with the device itself.
#Clipper oil how to#
You need to know what clipper oil does and how to use it. So, not using clipper oil is costing you money. That means the trims will get worse and you’ll find yourself having to replace those clippers way more often than you’d otherwise have to. Here’s the downside of that: those clippers are going to get worn down quicker and won’t last you long. But so many men either flat out refuse to use it or don’t know how to use it properly. Because of that, you’re about to learn everything you need to know about clipper oil.ĭon’t get me wrong – it isn’t rocket science. Poor maintenance of grooming tools is an easy trap to fall into.
0 kommentar(er)
